Our Warranties
Warranty cover for every product we make.
Different products have different warranty periods, depending on what they are and how they're used. This page explains the warranty on each of our products, what's covered, and how our prorated warranty works.
We back all of our products with a comprehensive warranty. We stand by what we make, and you can rest assured that your warranty is backed by a reputable company with over 70 years of experience in the bedding industry.
- 10 yearsmattresses, and adjustable bed structures and motors
- 5 yearslatex pillows and toppers
- 2 yearsadjustable bed remote controls
All warranties are against manufacturing defects. All our mattresses are made at our Melbourne factory.
How it works
What a prorated warranty means
Our warranty reflects the nature of the products we sell. Mattresses are long-term consumable goods: they gradually wear over their lifespan of use. Our warranty protects you against manufacturing defects. A prorated warranty means the level of cover reduces in set steps over the warranty period.
Fully covered in year one
If there is a manufacturing defect, it almost always shows up within the first couple of weeks, well before months or years have passed. That's why you're fully covered for the whole first year.
Then 10% less each year
As time goes on, a manufacturing defect becomes less and less likely, and any issue is more likely to be wear and tear from normal use. So the cover reduces by 10% every year, as shown below for our 10-year products.
10-year prorated warranty: share of the product's value covered for a manufacturing defect
- Year 1100%
- Year 290%
- Year 380%
- Year 470%
- Year 560%
- Year 650%
- Year 740%
- Year 830%
- Year 920%
- Year 1010%
The detail
What's covered, and what isn't
✓Covered
Manufacturing defects are fully covered. For example:
- Mattresses: sagging that we determine to be premature or abnormal
- Adjustable beds: premature failure of the structure or motors, for 10 years
- Latex pillows and toppers: premature breakdown of the latex that affects how the product performs, for 5 years
- Adjustable bed remote controls: 2 years. Remotes are a consumable part, and in our experience they're more often damaged by accidents or rough handling than worn out through normal use.
✕Not covered
- Normal wear and tear from years of use, as explained above
- Damage from misuse or abuse of the product, such as sitting on an adjustable bed while it's raised
- A change in comfort preference. For that, see our 100-Night Layer Swap.
Good to know
Normal for latex, not a fault
Slight colour change over time
New latex is a cream or oatmeal colour, almost white. After many years, it may turn slightly more yellow as it naturally oxidises with air. This happens with all foams, natural latex and synthetic alike, and is perfectly normal. After many years, the surface may also show some very minor crumbling for the same reason. This doesn't affect how the latex cushions and supports you.
Adjusting to the feel
The mattress you feel in our showroom is exactly how yours will feel and perform at home. If you're used to a very hard, firm mattress, expect to need some time to adjust to the closer conformance and pressure relief of full latex. Please don't mistake this for a lack of support.
Care
Help your mattress last
- Use a breathable, fitted cotton mattress protector. It keeps sweat and spills away from the latex. Avoid waterproof protectors: they're essentially plastic sheets and don't breathe well. Ours are 100% natural cotton and machine washable.
- Give it a proper base. A flat platform base is ideal. A slatted bedframe is fine as long as you cover the slats with a sheet of board or cardboard. This evens out the surface, so the mattress doesn't sink into wide gaps between slats.
- Flip each layer regularly. If your mattress has separate layers, flip each individual layer at regular intervals, for example every few years. This is very important for even wear.
- Wash the cover gently, and only if needed. With a good protector, it's rare to need to wash a removable zip cover. If you do, wash it gently and line dry. Don't put it through a rough machine cycle or a dryer.
Making a claim
How to make a warranty claim
Contact us
Call us on 03 9042 1173 or email info@naturalcomfort.com.au. Please include your order number, a short description of the problem and a few clear photos.
We assess it
We'll look at the details you've sent. If you're in Melbourne metro, we may ask to come and inspect the mattress or bed in person.
We repair or replace it
If we find the product is defective, the warranty applies, and we'll either repair or replace what's wrong with your mattress or adjustable bed.
The fine print
Full warranty terms
The complete terms for each product are below. Please keep your tax invoice as proof of purchase for the length of your warranty.
Terms that apply to all products
Who the warranty covers
The warranty applies only to the original purchaser who bought the product directly from Natural Comfort. It can't be transferred to anyone who later owns the product.
When it starts
The warranty period starts on the date you take delivery of your product, as shown on your tax invoice. Proof of purchase is required for every claim.
What we'll do
If we determine that your product has a defect covered by these terms, we will repair or replace it, at our option, in line with the prorated cover for that product.
How prorating works
In the first year you're fully covered (100%). After that, the warranty covers a reducing share of the original purchase price towards the repair or replacement, and you pay the remaining balance.
Domestic use
This warranty applies to products bought for use in the home. If you purchased through our commercial program, your products are covered by a separate commercial warranty with its own terms. Please get in touch and we'll happily take you through it.
Ex-display, clearance and "as is" products
Products sold as ex-display, clearance or "as is" aren't covered by this warranty, unless we've explicitly told you otherwise at the time of sale.
Not covered for any product
- Damage from misuse, abuse, improper handling, or repairs or modifications not carried out by us
Making a claim
Contact us on 03 9042 1173 or at info@naturalcomfort.com.au with your proof of purchase, a description of the problem and clear photos. If you're in Melbourne metro, we may inspect the product in person. If a replacement is approved, the original product must be returned to us.
Inspection and transport costs
You'll need to cover the cost of an inspection upfront. If the product needs to be transported for us to inspect it, you'll cover that cost too. If we find the product is defective and the warranty applies, we'll reimburse you for these costs.
Mattresses: 10-year prorated warranty
Cover by year
Year 1: 100% · Year 2: 90% · Year 3: 80% · Year 4: 70% · Year 5: 60% · Year 6: 50% · Year 7: 40% · Year 8: 30% · Year 9: 20% · Year 10: 10%
What counts as a defect
- Premature sagging of the mattress, beyond what would normally be considered acceptable for the nature of the product. To be considered, sagging must measure at least 3cm deep, with the mattress unoccupied on a suitable base.
Not covered
- Normal wear and tear, including indentations of less than 3cm
- Minor crumbling that comes with age, as latex, like any foam whatever it's made from, naturally oxidises, where it doesn't affect how the mattress performs
- Damage caused by improper support, such as an unsuitable base, or wide slats that haven't been covered with board or cardboard
- Burns, spills, bodily fluids, stains, cuts or tears
- Natural colour change of the latex over time
- A change in comfort preference. See our 100-Night Layer Swap instead.
Adjustable beds: 10-year prorated warranty on structure and motors
Cover by year
Year 1: 100% · Year 2: 90% · Year 3: 80% · Year 4: 70% · Year 5: 60% · Year 6: 50% · Year 7: 40% · Year 8: 30% · Year 9: 20% · Year 10: 10%
What counts as a defect
- Premature failure of the bed's frame or structure, earlier than would reasonably be expected for the product
- Premature failure of a motor, earlier than would reasonably be expected for the product
Not covered
- Remote controls, which have their own 2-year warranty
- Loading the bed beyond its stated weight limit
- Sitting on the bed while it's in the raised position. This is considered misuse and will void the warranty.
- Damage from moving or relocating the bed, power surges, or liquid
- Normal cosmetic wear to fabrics and finishes
Latex pillows and toppers: 5-year warranty
Cover by year
Year 1: 100% · Year 2: 80% · Year 3: 60% · Year 4: 40% · Year 5: 20%
What counts as a defect
- Premature cracking, splitting or crumbling of the latex that significantly affects the product's ability to perform properly
Not covered
- Normal wear and tear and gradual softening over time
- Minor crumbling that comes with age, as latex, like any foam whatever it's made from, naturally oxidises, where it doesn't affect how the product performs
- Damage from washing the latex, burns, spills, bodily fluids, stains, cuts or tears
- Natural colour change of the latex over time
- A change in comfort preference
Adjustable bed remote controls: 2-year warranty
What counts as a defect
If your remote control fails prematurely, earlier than would reasonably be expected, within the first 2 years, we'll replace it.
Not covered
- Damage from dropping, crushing or liquid
- Batteries
- Lost remotes
Questions
Warranty FAQs
What's the difference between a defect and wear and tear?
A manufacturing defect is a fault in how the product was made, such as a mattress sagging prematurely or abnormally. Wear and tear is the gradual change that comes from years of normal use. Our warranty covers defects, not wear and tear.
How does the prorated warranty work?
You're fully covered (100%) in the first year, because manufacturing defects almost always show up within the first few weeks. After that, the cover reduces by 10% each year: 90% in year 2, 80% in year 3, and so on, down to 10% in year 10.
Why are the warranty periods different for each product?
Each warranty reflects the nature of the product. Mattresses and adjustable bed structures and motors are built for the long term, so they carry 10 years. Pillows and toppers carry 5 years. Remote controls carry 2 years, as they're more often damaged by accidents or rough handling than worn out.
What's covered on an adjustable bed?
Premature failure of the structure and motors is covered for 10 years, on a prorated basis. Remote controls are covered for 2 years, as they're a consumable part that's more often damaged by accidents or rough handling than worn out.
Will my mattress soften or "settle in"?
No. Your mattress will feel and perform just like the one you tried in our showroom. If you're coming from a very firm mattress, you may need a little time to adjust to the closer conformance and pressure relief of latex, but that's not a change in the mattress itself.
Do I need to wash the mattress cover?
Rarely. A good cotton mattress protector should do the job. If you ever do need to wash a removable zip cover, wash it gently and line dry it.
More questions? See our FAQs or our terms of sale.
Think something's not right?
Give us a call or send us your order number and a few photos, and we'll take a look.

